聚丙烯酸钾的材料安全数据表(MSDS)

在 Facebook 上
推特
LinkedIn

第 1 部分:化学产品和公司标识

产品名称 聚丙烯酸酯钾
Synonyms: Polyacrylic acid, Potassium salt; PAA-K
Chemical Formula: (C3H3KO2)n
化学文摘社编号: 25608-12-2

第 2 部分:成分、成分信息

Component: 聚丙烯酸酯钾
化学文摘社编号: 25608-12-2
Concentration: > 99%

第 3 部分:危害识别

紧急情况概述:

  • 可能会刺激呼吸道和皮肤。
  • Inhalation of dust may irritate the respiratory tract.
  • Potential environmental hazard if large quantities are released.

入境路线:

  • 吸入
  • 皮肤接触
  • 目光接触
  • 摄入

第 4 部分:急救措施

吸入:

  • Move the person to fresh air. If breathing is difficult, provide oxygen and seek medical attention.

皮肤接触:

  • Wash with plenty of soap and water. Remove contaminated clothing. Seek medical attention if irritation persists.

眼神交流:

  • 立即用大量清水冲洗至少 15 分钟。就医。

摄入:

  • 用水漱口。除非有医务人员的指导,否则不要催吐。就医。

第 5 节:消防措施

合适的灭火介质:

  • 喷水、干化学药品、二氧化碳或泡沫。

消防员特殊防护装备:

  • 佩戴自给式呼吸器和全套防护服。

危险燃烧产物:

  • 碳氧化物(CO、CO2)

第 6 节:意外释放措施

个人防护措施:

  • 避免形成粉尘。使用个人防护设备。

环境预防措施:

  • Prevent further leakage or spillage if safe. Do not let product enter drains.

清理方法:

  • 清扫并铲到合适的容器中进行处理。避免产生粉尘。

第 7 节:处理和储存

处理:

  • Avoid contact with skin and eyes. Avoid dust formation. Ensure adequate ventilation.

存储:

  • 存放在阴凉干燥处。保持容器密封。

第 8 节:接触控制/个人防护

工程控制:

  • 确保充分通风。

个人防护设备(PPE):

  • Respiratory Protection: Use appropriate respirators.
  • Skin Protection: Wear suitable protective clothing.
  • Eye Protection: Safety goggles.
  • Hand Protection: Protective gloves.

第 9 节:物理和化学特性

Appearance: White granular powder
Odor: Odorless
pH: 6.0-8.0 (1% solution)
Melting Point/Range: Not applicable
Boiling Point/Range: Not applicable
Flash Point: Not applicable
Solubility in Water: Soluble

第 10 节:稳定性和反应性

稳定性:

  • 在建议的储存条件下保持稳定。

应避免使用的材料

  • 强氧化剂。

危险分解产物:

  • 碳氧化物。

第 11 节:毒理学信息

急性毒性:

  • LD50 口服:不详
  • LD50 皮肤:不可用
  • LC50 吸入:不详

慢性毒性:

  • 无数据。

第 12 部分:生态信息

生态毒性:

  • 无数据。

持久性和降解性:

  • 无数据。

第 13 节:处置注意事项

废物处理方法:

  • 按照当地、州和联邦法规进行处置。

第 14 部分:运输信息

DOT (美国):

  • 不受管制。

IMDG:

  • 不受管制。

国际航空运输协会:

  • 不受管制。

第 15 部分:监管信息

OSHA 危害:

  • 没有发现。

TSCA 状态:

  • 已上市。

第 16 部分:其他信息

编写人

  • GELSAP

免责声明
The information provided in this MSDS is based on data available and is believed to be accurate. However, it is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use, and disposal of the product are beyond our control and may be beyond our knowledge. For this reason, we do not assume responsibility and expressly disclaim liability for loss, damage, or expense arising out of or in any way connected with the handling, storage, use, or disposal of the product.

详情和价格

准备好提升您的聚合物项目了吗?联系 GELSAP,获取无与伦比的专业技术知识、一流的产品支持和尖端的聚合物解决方案。

zh_TW繁體中文
返回頂端

欢迎访问 GELSAP

需要支持?

我们有一个专门针对 SUPPORT 的网站。